APOGEE Reports

The Application Sub-Point Display Report allows you to display all the sub-points and their current values for APOGEE and BACnet devices. From System Browser, you can select an APOGEE P2 or BACnet network, panel(s), or device(s) and drop it onto the report.

You can filter this report in the Filter Options sections. In the filter, you can select one or more subpoints or application numbers.

Information

NOTE:
The Sub-point Edit field in the Filter Option section only supports numbers from 1 through 255.

The following information displays for each sub-point:

• Application Number
• Name
• Priority
• Status
• Subpoint Number
• Units
• Value

The APOGEE Panel Point Address displays a list of points in a selected APOGEE Ethernet or BACnet field panel. For each logical point, the report lists the:

• Command Priority
• Drop
• Engineering Units
• FLN
• Point
• Point Type
• Point Name
• Point Address Type
• Panel Name
• Point System Name
• Status
• Value/State

This report is similar to the APOGEE Panel Point Log report. However, you can run the report for a single panel by point address rather than a point name. The report allows you to filter the point addresses included in the report by selecting which FLNs, drops, and point numbers should be included.

The APOGEE System Profile report displays system configuration information for all defined APOGEE P2 and BACnet ALNs, workstations, field panels, and FLN devices in your building system, and includes configuration information for the defined devices and field panels.

This report provides a complete overview of the building system.

The APOGEE TEC Initial Values report allows you to display subpoints in an override state for the selected APOGEE P2 and BACnet FLN devices, TEC’s, PTEC’s, and Equipment Scheduler zones. See below for a full list of supported devices and hardware.

You can specify a TEC, PTEC, and so on, by application name, using wildcards or drag-and-drop from System Browser.

You can filter the report in the Filter Options section. This section allows you to select a single subpoint and/or application number to filter.

The following information is displayed for each overridden sub-point:

• Application Number
• Initial Value
• Name
• Priority
• Status
• Subpoint Number
• Units
• Value

The BACnet Trend Definition Report lists all the trend definitions for a particular trended BACnet point.

For each Trend definition included in the report, the following properties are included:

• Description
• Log Enable
• Notification Class
• Notification Threshold
• Object Identifier
• Object Name
• Samples at Panel
• Start Time
• Stop Time
• Stop When Full
• Trend Every
• Trend Location
• Trend Type
• Trended Objects

Once you have imported the report template, select it in System Browser, and then drag the Trend Log Object Table, for the particular object whose trend definitions you want to view, and drop it into the report. Once you click Run, the trend definitions for the trended point display in the report.

The default value in the Condition Filter should not be deleted. However, additional filter criteria can be added.